Centralite 3385001-RZHA Azela Zigbee 1000W Relay Switch

From Wink@Home Wiki
Jump to: navigation, search
Centralite 3385001-RZHA Azela Zigbee 1000W Relay Switch
Compatibility Unofficial - User Verified
Manufacturer Centralite
Model/Part # 3385001-RZHA
Network Type Zigbee
Category(s) Lights & Power
Type(s) Switch
Sub-Type(s) Hardwired

Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Centralite 3385001-RZHA Azela Zigbee 1000W Relay Switch


The Azela In-Wall Relay provides an easy solution for homeowners looking to control existing lighting fixtures in their homes. The In-Wall Relay allows lighting loads of up to 1000 watts. The 3-Button In-Wall Relay can also act as a programmable keypad to control other ZigBee Home Automation devices in the home or trigger custom lighting scenes.

Azela is a ZigBee™ Home Automation solution designed to operate with other ZigBee HA devices. The beauty of ZigBee HA is that it is based on a global standard which allows you to construct a manufacturer agnostic home automation system. This allows manufacturers to focus on their core competencies to deliver high quality products at an affordable price point to the end user. The end result is the peace of mind that you will always have options for your home automation system.

Centralite Azela products are compatible with very popular Home Automation systems such as Xfinity Home by Comcast as well as other systems from Time Warner Cable and Rogers Cable in Canada. These are great add-ons to your out of the box systems and can be installed very simply and easily.


  • Relays are rated at 1000 Watts
  • Blue LED status indicator light
  • 2.4 GHz, 16 channel spread spectrum radio to deliver maximum reliability
  • Dimensions without wallplate: 2.65"H x 1.7"W x 1.4"D
  • Works with multiple manufacturer's ZigBee HA devices
  • Products approved to work with iControl platform
  • Capable of switching loads as follows;
    • 120 VAC 1000 W Incandescent
    • 120 VAC 1000 W Halogen
    • 120 VAC 1000 W Fluorescent
    • 120 VAC 1000 VA Magnetic Low Voltage Transformer
    • 120 VAC 1000 VA Electronic Low Voltage Transformer



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.