Centralite 4257050-RZHAC Appliance Module

From Wink@Home Wiki
Jump to: navigation, search
Centralite 4257050-RZHAC Appliance Module
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Centralite
Model/Part # 4257050-RZHAC
Network Type Zigbee
Category(s) Lights & Power
Type(s) Switch
Outlet
Sub-Type(s) Plugin
Files CentraliteInstallationGuide-3SeriesApplianceModule.pdf

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Centralite 4257050-RZHAC Appliance Module


OVERVIEW


Control and schedule when the lamps in your home go on and off, from anywhere. With the PEQ Lamp Module you can: turn lamps on or off from anywhere with our smartphone, tablet or PC. Use PEQ's Away and Vacation modes to create rules that make it look like you're home, even when you're not, by turning lights on or off based on a schedule you set. Create rules that tell your lights to automatically turn on when you open the door (requires a PEQ Door and Window sensor). This devices requires a PEQ hub and service plan.

KEY FEATURES


  • Turn lamps in your home on or off, from anywhere
  • Control from anywhere with your smarthphone, tablet or PC
  • Compact design

PRODUCT LINKS


DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.