Cooper Wiring Devices RF9518 Aspire RF Single-Pole Wireless Light Switch

From Wink@Home Wiki
Jump to: navigation, search
Cooper Wiring Devices RF9518xx Aspire RF Single-Pole Wireless Light Switch
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Cooper Wiring Devices
Model/Part # RF9518xx
Network Type ZWave
Category(s) Lights & Power
Type(s) Switch
Sub-Type(s) Hardwired

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Cooper Wiring Devices RF9518xx Aspire RF Single-Pole Wireless Light Switch


OVERVIEW


The Cooper Wiring Devices RF9518AW ASPIRE RF 8-Amp Single-Pole Wireless Light Switch is ideal for replacing regular switches or dimmers to provide local and remote on and off control for incandescent loads. This switch provides programmable functions, such as scenes, events, association, child lockout and more when used with ASPIRE RF controllers (RFHDCSG, RFTDCSG) or other "Z-Wave" compliant controllers. The switch can be both manually or remotely controlled by commands sent from your ASPIRE RF or "Z-Wave" compatible controller or program. The RF9518AW is rated at 120-volts for 60-Hertz for standard house wiring and fits in standard wall boxes. This switch has (4) 6-inch pre-stripped wire leads for line, load, traveler and ground functions. The Cooper Wiring Devices RF9518AW ASPIRE RF 8-Amp Single-Pole Wireless Light Switch features an attractive alpine white finish. Whether a home's style is traditional, modern, casual, cozy or rustic, it will demand more from wiring devices than in years past. Cooper Wiring Devices is dedicated to providing the up-to-date wiring device solutions; solutions that increase energy efficiency, increase productivity, promote safety at work and in the home and produce reliable performance. Cooper Wiring Devices is a trusted name in electrical products for over 175-years.

KEY FEATURES


  • Ideal for replacing regular switches or dimmers to provide local and remote on and off control
  • Provides programmable functions, such as scenes, events, association, child lockout and more when used with controllers
  • Switch can be both manually or remotely controlled
  • Comes with (4) 6-inch pre-stripped wire leads for line, load, traveler and ground functions
  • Comes with a limited warranty and works with Incandescent type load only
  • Z-Wave Certification ID: ZC08-13020002

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.