Dome DMMS1 Z-Wave Plus Motion Detector

From Wink@Home Wiki
Jump to: navigation, search
Dome DMMS1 Z-Wave Plus Motion Detector
Compatibility Unofficial - User Verified
Manufacturer Dome
Model/Part # DMMS1
Network Type ZWave
Category(s) Access Control, Security & Monitoring
Type(s) Monitoring
Sub-Type(s) Motion

Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

Who Craig Trunzo
When 5/16/2017

CONFIRMED WORKING: Unofficial - User Verified

Dome DMMS1 Z-Wave Plus Motion Detector


The Dome Home Automation DMMS1 Z-Wave Certified Motion Detector tracks motion in your home, helping you keep your family safe. When motion is detected, your Z-Wave hub will send an alert to your smartphone, set off an alarm or trigger a lighting scene. This detector can also measure light levels to ensure the lights are operated only when required. Convenient magnetic mount offers the ultimate flexibility for multi surface adaptable installation on either wall, ceiling or table top. The device comes with a CR123A battery and has a 3-year battery life, so you can always be confident that your detector has power. Extra-long Z-Wave wireless range (up to 150 feet) allows you to place it where it’s needed without worrying if the signal reaching your Z-Wave Hub. The Dome Home Automation DMMS1 Z-Wave Certified Motion Detector comes with a 1-year limited warranty. Measurements in inches: 2.5 by 3.5 by 6. This sensor requires a Z-Wave Certified hub for operation. The Dome Home Automation system gives your family the ease and security you can count on. With Dome, you’re always connected and always covered.


  • Detects movement inside your home with extra wide 110 degree coverage and responds to activity by sending an alert to your smarthome system
  • Capable of sensing current light conditions in the room helping create smart lighting scenes
  • Convenient magnetic mount offering ultimate installation flexibility
  • Z-Wave Plus Certified. Requires a Z-Wave Certified Hub to operate. Up to 150-foot range and 3-year battery life (CR123A Battery Included)



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.