Dome DMMZ1 Z-Wave Smart Electronic Mouse, Rat and Rodent Trap

From Wink@Home Wiki
Jump to: navigation, search
Dome DMMZ1 Z-Wave Smart Electronic Mouse, Rat and Rodent Trap
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Dome
Model/Part # DMMZ1
Network Type ZWave
Category(s) Other Stuff
Type(s) Mouse Trap

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

REPORTED BY
Who Craig Trunzo
When 5/15/2017

CONFIRMED WORKING: Unofficial - User Verified

Dome DMMZ1 Z-Wave Smart Electronic Mouse, Rat and Rodent Trap


OVERVIEW


The Dome Home Automation DMMZ1 Mouser is a powerful rodent electric trap with Z-Wave technology built-in. It kills mice, rats and other rodents quickly, cleanly and humanely with a powerful jolt of electricity. Simply set bait, turn on and place in desired location. When connected to Z-Wave Certified Hub, once the trap is full, it sends out a notification to your smarthome system.You can easily dispose of Mouser’s contents without ever having to touch them. Use the top handle and tip to dispose of caught rodents. Specially designed removable and washable bait tray will allow you to easily replace the bait and set it back up. It operates on 4 AA batteries (not included) and is optimised to last over 50 uses. Mouser features extra-long Z-Wave wireless range (up to 150 feet) and Dome DMMZ1 Mouser comes with a 1-year limited warranty. Measurements in inches: 8.75 by 4.5 by 5. Dome Home Automation Z-Wave devices give your family peace of mind and security you can count on. With Dome, you’re always connected and always covered.

KEY FEATURES


  • Humanely kills mice, rats and other rodents with a powerful electric shock and sends an alert when the trap needs to be emptied
  • Easy to use: set bait, turn on and place in desired location
  • Up to 150-foot Z-Wave range. Operating Temperature: 32°F - 112°F. Powered by 4 AA batteries (not included) enabling it to be triggered over 50 times
  • Z-Wave Plus Certified. Works as a stand alone electronic mouse trap but requires a Z-Wave Certified Hub for notification functionality

NOTES

  • Amazon says this does not work with Wink. It does. I have one.
  • This pairs as a generic ZWave Sensor, and is assigned as a door/window sensor
    • The sensor normally shows closed
    • When triggered, it switches to open
    • Cycle power with the power switch to reset the sensor state

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.