Dome DMS01 Wireless Z-Wave Plus Siren

From Wink@Home Wiki
Jump to: navigation, search
Dome DMS01 Wireless Z-Wave Plus Siren
Compatibility Unofficial - User Verified
Manufacturer Dome
Model/Part # DMS01
Network Type ZWave
Category(s) Access Control, Security & Monitoring
Type(s) Security
Sub-Type(s) Siren

Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

Who Craig Trunzo
When 5/16/2017

CONFIRMED WORKING: Unofficial - User Verified

Dome DMS01 Wireless Z-Wave Plus Siren


The Dome Home Automation DMS01 Siren is a battery-operated Siren that can add audible notifications to any Z-Wave Home Automation system. It can be mounted or placed on any wall or surface, making it easy to incorporate into any system. Additional visual notification is provided by built-in flashing LED’s when triggered. One of a kind device on the market with 100% battery operation allowing for easy installation anywhere in your home. There is a 3-year battery life, so you can always be confident that your siren has power. Extra-long Z-Wave wireless range (up to 150 feet) allows you to place it where it’s needed without worrying if the signal is reaching your Z-Wave Hub. Dome DMS01 Siren comes with a 1-year limited warranty. Measurements in inches: 2.625 by 2.625 by 1.125. Dome Home Automation Z-Wave devices give your family peace of mind and security you can count on. With Dome, you’re always connected and always covered.


  • Loud alarm sound (up to 105dB) with flashing LED's when triggered
  • Mounts anywhere- it's wireless and 100% battery powered with 3-year battery life (2 CR123A Batteries Included). Up to 150-foot range
  • Z-Wave Plus Certified. Requires a Z-Wave Certified Hub to operate


Pair this as a GoControl Siren. It will look like a GoControl Siren in the Wink App, but will function correctly.



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.