Dome DMWD1 Z-Wave Plus Door/Window Sensor

From Wink@Home Wiki
Jump to: navigation, search
Dome DMWD1 Z-Wave Plus Door/Window Sensor
Compatibility Officially Supported
Manufacturer Dome
Model/Part # DMWD1
Network Type ZWave
Category(s) Access Control, Security & Monitoring
Type(s) Monitoring
Sub-Type(s) Open/Close

Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

Who Craig Trunzo
When 5/10/2017

CONFIRMED WORKING: Officially Supported

Dome DMWD1 Z-Wave Plus Door/Window Sensor


The Dome Home Automation DMWD1 Door/Window Sensor does more than just monitor if a door or window is opened at your home. With a Z-Wave Certified Hub, this sensor can respond to real-time events by sending alerts to your smartphone when the garage door is left open or by turning on the basement lights automatically when you open the door to go downstairs. Your Hub can even alert you when cabinets containing dangerous cleaning supplies, prescription medication or alcohol are opened, keeping your family safe. A Z-Wave Certified Hub, such as Dome Hub is required to operate the Door/Window Sensor. Most functionality is also available when used with other compatible hubs. Extra-long wireless range (up to 150 ft.) allows you to easily keep track of doors, windows and cabinets at your home. There is a 3-year battery life, so you can always be confident that your sensor has power. The sensor measures 2.75 in long x 0.8 in high x 0.8 in wide and the magnet measures 1.6 in long x 0.5 in high x 0.5 in wide. Dome DMWD1 Door/Window Sensor comes with a 1-year limited warranty. Dome Home Automation system gives your family peace of mind and security you can count on. With Dome, you’re always connected and always covered.


  • Monitors if doors/windows are open or closed, can send you reminders if you left your garage door open
  • Works with exterior or interior doors, garage doors, patio doors, windows, cabinets, safes, closet doors, baby gates and other openings
  • Up to 150-foot range and 3-year battery life (CR14250 Battery Included)
  • Z-Wave Plus Certified. Requires a Dome Home Automation Hub or other Z-Wave Certified Hub to operate



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.