ZWave Products PD-100 Z-Wave Plug-In Dimmer Switch
From Wink@Home Wiki
(Redirected from Dragon Tech PD-100 Z-Wave Plug-In Dimmer Switch)

Dragon Tech PD-100 Z-Wave Plug-In Dimmer Switch
![]() |
![]() |
Compatibility | Unofficial - User Verified |
---|---|
Manufacturer | Dragon Tech |
Model/Part # | PD-100 |
Network Type | ZWave |
Category(s) | Lights & Power |
Type(s) | Dimmer |
Sub-Type(s) | Plugin |
Dimmable | ![]() |
---|---|
Weatherproof | ![]() |
RGB | ![]() |
Tunable White | ![]() |
It Speaks | ![]() |
Touchscreen | ![]() |
Voice-Controlled | ![]() |
CONFIRMED WORKING: Unofficial - User Verified
Dragon Tech PD-100 Z-Wave Plug-In Dimmer Switch
Contents
KEY FEATURES
- Z-Wave Plus Certified
- New 500 series Z-Wave Chipset!
- Dimming Capability
- Repeats Z-Wave commands to other devices
PRODUCT LINKS
DISCLAIMER
- Although I do my best to verify every product that is reported as compatible, things do change.
- Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
- Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
- One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
- I use a Wink Hub 2 as my primary controller.
- My testing is done on the Wink Hub 2.
- I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
- I am a beta tester.
- This means my hub might work with a device that won't work for the general public.
- I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
- If I report that it works, but it does not work for you, chances are it will start working for you in the near future.