Enbrighten 35931 Z-Wave Smart LED Bulb, Dimmable, 60-Watt Equivalent, 2700K Soft White

From Wink@Home Wiki
Jump to: navigation, search
Enbrighten 35931 Z-Wave Smart LED Bulb, Dimmable, 60-Watt Equivalent, 2700K Soft White
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Officially Supported
Manufacturer Enbrighten
Model/Part # 35931
Network Type ZWave
Category(s) Lights & Power
Type(s) Light Bulb
Sub-Type(s) Single White

PRODUCT FEATURES
Dimmable Checkmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

Enbrighten 35931 Z-Wave Smart LED Bulb, Dimmable, 60-Watt Equivalent, 2700K Soft White


OVERVIEW


Breathe new life into your home’s Z-Wave network when you upgrade to a Enbrighten Dimmable Smart LED Bulb. This 60-watt equivalent wireless bulb works with all standard light fixtures and lamps, allowing you to upgrade to smart control without compromising the design of your home. No wiring is required — simply replace your existing bulb (E26 base) with the smart bulb and begin enjoying the long life and convenience of your new light. From the convenience of your smartphone or tablet, turn the lights on and off, dim or brighten your room and set lights according to your schedule. At 750 lumens, the smart bulb consumes only 9 watts of power while burning brightly for up to 25,000 hours. Smart controls require a standalone Z-Wave remote or supported Z-Wave hub, including SmartThings, Wink, Staples Connect, Harmony Home, Piper, ADT Pulse, Vera, and Nexia. This product is guaranteed with a 2-year limited warranty.

KEY FEATURES


  • Turn the lights on and off, dim or brighten your room and set lights according to your schedule from the convenience of your smartphone or tablet
  • Works with all standard light fixtures and lamps (E26 base) – No wiring required
  • 750 Lumens – Soft White (2,700K Temp.)
  • Consumes only 9 watts of power while burning brightly for up to 25,000 hours (approx. 22 years at 3 hours per day)
  • Smart control requires a standalone Z-Wave remote or support Z-Wave hub, including SmartThings, Wink, Staples Connect, Harmony Home, Piper, ADT Pulse, Vera, and Nexia

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.