Enerwave ZW15R Z-Wave 15A Tamper Resistant Outlet

From Wink@Home Wiki
Jump to: navigation, search
Enerwave ZW15R Z-Wave 15A Tamper Resistant Outlet
Compatibility Unofficial - User Verified
Manufacturer Enerwave
Model/Part # ZW15R
Network Type ZWave
Category(s) Lights & Power
Type(s) Outlet
Sub-Type(s) Hardwired

Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

Who Michael Salerno
When 5/17/2017

CONFIRMED WORKING: Unofficial - User Verified

Enerwave ZW15R Z-Wave 15A Tamper Resistant Outlet


ENERWAVE ZW15R Z-Wave Outlet replaces standard wall receptacle and enables your wireless control to home as very important component of home automation. Same as other Z-Wave dimmers, sensors and switches, ZW15R outlet must be connected/paired wirelessly into the home automation system gateway/hub, such as SmartThings, Vera, VeraEdge,SmartThings Gateway, Mi Casa Verde Vera3 or other z-wave certified hubs.

The pairing is easy, and once done, it will be connected forever unless you change your hub. After that, you don't have to worry about forgetting to unplug devices after power charging, or forgetting to turn off the fan, floor light, TV, portable air-condition, heater, speaker, music player and electric wok. YOU CAN TURN THEM OFF REMOTELY from anywhere on any brand smart phone, tablet, ipad or desktop computer. Replacing standard wall receptacle with z-wave outlet ZW15R helps cut down energy bill and improve safety. It is not only simply an ON/OFF control, but you can add them to a customized scene/event group and control it together with other devices in the same scene group for great convenience and smart control of your home event and schedule.

One outlet is z-wave controlled outlet with programmable functions of managing ON/OFF by scenes, association and schedule event. The other outlet is always-on for flexibility to charge your devices. ENERWAVE and TOPGREENER outlet/receptacle products use Tamper Resistant design for more secured safety. ZW15R z-wave receptacle has a blue LED indicates the status of the controlled outlet and/or act as a night light for easy locating in darkness. It is required by code for newly built homes. This Z-wave TR Duplex Receptacle is fully 2011 NEC code compliant.Two wall plates included in the box, one of them a screwless wall plate. Easy installation and paring, your home can be SMART, Energy Efficient and Secured with Enerwave Z-Wave outlets, dimmers, sensors and switches!

  • Incandescent 1000W
  • Ballast 1200VA
  • Resistive 1800W
  • Motor 1/2 hp
  • Range: Up to 100ft Line of Sight Between the Wireless Controller or Closest Z-Wave Receiver Module


  • Enables any-distance wireless ON/OFF control to connected lights and small appliances on mobile devices and computers
  • Simply replaces standard in-wall outlet, then connects to any Z-Wave certified hub to activate the SMART home automation function
  • Works with Echo Alexa for voice ON/OFF control, great convenience and lifestyle
  • Tamper-Resistant, 1 always-on outlet another z-wave controlled that is both mannual & remote ON/OFF; Includes 2 Wall plates
  • Can be controlled together with other z-wave devices in scene groups with one button push for convenience



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.