Enerwave ZWN-BPC Z-wave Wireless Ceiling-Mounted Occupancy

From Wink@Home Wiki
Jump to: navigation, search
Enerwave ZWN-BPC Z-wave Wireless Ceiling-Mounted Occupancy
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Enerwave
Model/Part # ZWN-BPC
Network Type ZWave
Category(s) Access Control, Security & Monitoring
Type(s) Monitoring
Sub-Type(s) Motion

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Enerwave ZWN-BPC Z-wave Wireless Ceiling-Mounted Occupancy
NOTE: As of this writing, 5/10/20217, this pairs with Wink as a door/window sensor. It does report motion as an "open" event, so you CAN trigger robots and such. In the future, this will probably be reassigned correctly, but for now, you have to pretend it's a contact sensor.

OVERVIEW


The PIR Ceiling Sensor ZWN-BPC is a Z-Wave enabled device and is fully compatible with other Z-Wave certified devices. Z-Wave enabled devices displaying the Z-Wave logo can also be used with this ceiling sensor regardless of the manufacturer. This device is typically used in conjunction with the ZWN-BDS to monitor the environment and provide hands-free lighting control. It can also trigger a Z-Wave enabled alarm when motion is detected. This Sensor acts as a security device by detecting changes in infrared radiation levels when someone within/across the detection of coverage triggering signal will be transmitted to associated Z-Wave devices giving you more home and office security. This Ceiling Sensor is also compatable with Z-Wave association meaning you can trigger other z-wave actions when the ZWN-BPC detects motion. The expected battery life of this ceiling sensor is about 1 year. Ceiling sensor can be monitored by PC, tablet, or smart phone. This sensor has a 360 degree field of view and can sense up to 600 sq.ft. Z-Wave hub required to control this device.

KEY FEATURES


  • ZWN-BPC Occupancy PIR sensor enabled with Z-Wave wireless control and Z-wave association function
  • Detects motions, automatically control ON/OFF/Dimming/thermostat of 5 z-wave associated or group scene devices
  • 360° motion detection, 600 sq.ft range, 4-position adjustable PIR sensitivity
  • Battery-Powered; Low Power Detecting; Easy install, no need of wiring/drilling, 2 free AA batteries; Sensor status can be monitored from PC, tablet or smartphone
  • Z-Wave hub required. See Technical Details for compatibility list** Long lasting battery life approximately 1 year with low battery detection

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.