Fibaro FGS-213 ZW5 US Single Switch 2, Z-Wave Plus Relay Switch

From Wink@Home Wiki
Jump to: navigation, search
Fibaro FGS-213 ZW5 US Single Switch 2, Z-Wave Plus Relay Switch
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Fibaro
Model/Part # FGS-213
Network Type ZWave
Category(s) Lights & Power
Type(s) Switch
Sub-Type(s) Other

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

REPORTED BY
Who Craig Trunzo
When 5/17/2017

CONFIRMED WORKING: Unofficial - User Verified

Fibaro FGS-213 ZW5 US Single Switch 2, Z-Wave Plus Relay Switch


OVERVIEW


The single switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control one electric device. It is designed to turn electrical devices on and off and to measure their power and energy consumption. The compact size of the device makes it the world's smallest of its type and allows for the product to be installed in wall switch boxes or housings. The single switch 2 can be controlled either via Z-Wave network or with a wall switch through a direct connection. Compatible with most Z-Wave controllers such as home center 2 and lite, SmartThings, Nexia, vera, clare controls and homeseer.

KEY FEATURES


  • To be installed in wall switch boxes or electrical outlets making your existing switch/outlet compatible with your Z-Wave network
  • Tony size, 1.7"x1.5"x.8"
  • Works with various types of switches – Momentary, toggle
  • Advanced microprocessor control
  • Z-wave certified: Cert ID: zc10-16095201/frequency region: U.S./Canada/Mexico, Z-Wave library version: 4.55.00

NOTES

Power monitoring functions do not currently work with Wink.

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.