GE 12721 Z-Wave Duplex Receptacle

From Wink@Home Wiki
Jump to: navigation, search
GE 12721 Z-Wave Duplex Receptacle
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer GE
Model/Part # 12721
Network Type ZWave
Category(s) Lights & Power
Type(s) Outlet
Sub-Type(s) Hardwired

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

GE 12721 Z-Wave Duplex Receptacle



KEY FEATURES


  • Easily replace any standard wall outlet with the GE Z-Wave controlled duplex receptacle to control lighting or small appliances with your mobile device or computer using any Z-Wave certified gateway
  • White lighting control matches most standard wall plates (wall plate not included)
  • Easily locate the receptacle in a dark room with the integrated blue LED indicator
  • Features one always-on pass-through AC outlet and one Z-Wave enabled outlet
  • Compatible with incandescent, fluorescent, compact fluorescent, xenon, halogen and LED lighting up to 600 watts
  • Compatible with any Z-Wave certified gateway, providing access from many popular home automation systems and applications (application software not included)
  • Can be controlled in groups of multiple lights or turned on or off within ambient interior lighting scenes.

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.