GE 12726 40 Amp Z-Wave Smart Switch, Direct-Wire Indoor/Outdoor

From Wink@Home Wiki
Jump to: navigation, search
GE 12726 40 Amp Z-Wave Smart Switch, Direct-Wire Indoor/Outdoor
Compatibility Unofficial - User Verified
Manufacturer GE
Model/Part # 12726
Network Type ZWave
Category(s) Lights & Power
Type(s) Switch
Sub-Type(s) Hardwired
Files GE12726Manual.pdf

Dimmable Xmark.png
Weatherproof Checkmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

GE 12726 40 Amp Z-Wave Smart Switch, Direct-Wire Indoor/Outdoor


Transform any home into a smart home with the GE z-wave direct-wire indoor/outdoor smart switch. When added to a z-wave network, the heavy duty switch enables wireless control of on/off functions for large load, hard-wired applications such as waters heaters, landscape lighting, spas, pool pumps and heaters. The smart switch can be used indoors or outdoors and features an easy access wire connection block, front mounted LED lights indicating power and on/off status, and an override switch to turn connected Devices on or off manually. The smart switch is housed in a lockable, tamper-resistant case to ensure settings and Wiring are secure. The rugged, weather-resistant design will keep out dirt and debris while being suitable for use in extreme weather conditions. The GE z-wave direct-wire outdoor smart switch is also equipped with state-of-the-art energy monitoring capability, allowing you to monitor watts and kilowatt hours, helping you keep your energy costs to a minimum. Take control of your home lighting and large load Devices with GE Z-Wave smart lighting controls.


  • Remotely controls the on/off functions of water heaters, landscape lighting, spas, pool pumps and heaters and more
  • Weather-resistant, rugged designed housing suitable for use outdoors in damp or wet conditions
  • Lockable, tamper-resistant metal case keeps out dirt/debris and keeps settings and wiring secure
  • Energy monitoring capability allows remote monitoring of watt- and kilowatt hours with compatible Z-Wave systems, including SmartThings and Vera
  • Front-mounted LED lights indicating power and on/off status



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.