GE 12730 Z-Wave Smart Fan Control

From Wink@Home Wiki
Jump to: navigation, search
GE 12730 Z-Wave Smart Fan Control
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer GE
Model/Part # 12730
Network Type ZWave
Category(s) Lights & Power
Type(s) Fan
Sub-Type(s) Hardwired

PRODUCT FEATURES
Dimmable Checkmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

GE 12730 Z-Wave Smart Fan Control



KEY FEATURES


  • Easily replace any standard in-wall switch with the GE Z-Wave Smart Fan Control to turn on/off or adjust speed levels with your mobile device or computer using any Z-Wave certified gateway
  • Includes white and light almond paddles that will match most standard wall plates (wall plate not included)
  • Can be controlled in groups of multiple devices
  • Easily locate the switch in a dark room with the integrated blue LED indicator
  • Provides ultimate flexibility: use by itself or with up to four GE add-on switches in three, four, five and six-way wiring configurations

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.