GE 34193 Portable Z-Wave Wireless Smart Motion Sensor

From Wink@Home Wiki
Jump to: navigation, search
GE 34193 Portable Z-Wave Wireless Smart Motion Sensor
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Officially Supported
Manufacturer GE
Model/Part # 34193
Network Type ZWave
Category(s) Access Control, Security & Monitoring
Type(s) Monitoring
Sub-Type(s) Motion

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

GE 34193 Portable Z-Wave Wireless Smart Motion Sensor


OVERVIEW


This Z-Wave compatible sensor boosts the safety and intelligence of your home by working with your home’s gateway to wirelessly trigger scenes and send alerts to your smartphone or tablet whenever motion is detected. The discreet, versatile design of the sensor makes it suitable for any indoor space, with a detection range up to 180 degrees and up to 45 feet away. Depending on your room size, the sensor offers three different motion-detecting sensitivity levels: low, medium and high. The sensor sits perfectly on a shelf, table, counter or desk, and can also be mounted to wall or ceiling by using the included mounting hardware. This sensor can be powered with the included batteries (up to two years of battery life) or via Micro USB cable (sold separately). Smart controls require a standalone Z-Wave remote or supported Z-Wave hub, including SmartThings, Wink, Staples Connect, Harmony Home, Piper, ADT Pulse, Vera, and Nexia. This product guaranteed with a 2-year limited warranty.

KEY FEATURES


  • Wirelessly trigger scenes and send alerts to your smartphone or tablet whenever motion is detected
  • This sensor sits perfectly on a shelf, table, counter or desk, and can also be mounted to wall or ceiling by using the included mounting hardware
  • Has a wireless range of up to 150 ft. from controller or closest Z-Wave device
  • Smart control requires a standalone Z-Wave remote or supported Z-Wave hub, including SmartThings, Wink, Staples Connect, Harmony Home, Piper, ADT Pulse, Vera, and Nexia
  • Power via micro USB cable (not included) or with the included batteries -Operates up to 2 years using 2 CR123 batteries

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.