GE 45600 Z-Wave Basic Handheld Remote

From Wink@Home Wiki
Jump to: navigation, search
GE 45600 Z-Wave Basic Handheld Remote
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer GE
Model/Part # 45600
Network Type ZWave
Category(s) Hubs & Controllers
Type(s) Remote

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

GE 45600 Z-Wave Basic Handheld Remote


OVERVIEW


GE's SmartHome Lighting Control products with Z-Wave technology allow you to control individual or groups of lights with a compact remote control in your home or office. Z-Wave is a radio frequency, mesh network technology specifically designed for use in residential lighting control. Every Z-Wave enabled wall switch is capable of relaying commands and utilizes two-way communications to ensure reliable operation throughout the entire home. The open-air, line-of-sight transmission distance is up to 100 feet between devices. Actual performance in a home will depend on the number of walls between the remote controller and the destination device, the type of construction and the number of devices installed in the system. The device's ability to relay commands and acknowledge receipt of commands makes Z-Wave an ideal solution for automating and controlling lighting systems.

KEY FEATURES


  • Control your entire home from one remote
  • Turn on/off and adjust the brightness of Z-Wave enabled lights
  • Operates the on/off functions of Z-Wave enabled small appliances
  • Manage up to 18 individual lights, 18 groups, and 18 scenes
  • Create custom lighting groups and scenes;LED lights provide command feedback

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.