GE 45610WB Z-Wave Add On Auxiliary Switch

From Wink@Home Wiki
Jump to: navigation, search
GE 45610WB Z-Wave Add On Auxiliary Switch
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer GE
Model/Part # 45610WB
Network Type ZWave
Category(s) Lights & Power
Type(s) Switch
Dimmer
Sub-Type(s) Hardwired

PRODUCT FEATURES
Dimmable Checkmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

GE 45610WB Z-Wave Add On Auxiliary Switch
This device does nothing on its own. See below for details


KEY FEATURES


  • * Requires a master switch to be installed - this is NOT a stand-alone switch!
  • Wirelessly control on/off functions of overhead lighting
  • Auxiliary switch for control of one light from two locations
  • Provides Z-Wave wireless and manual control
  • Requires in-wall installation with hard-wired connections. Easily connects using existing wires

NOTES

This device does nothing on its own and is only used to create a multi-way circuit with other GE switches.
Use in conjunction with GE 45612 Z-Wave In-Wall Dimmer or Ge 45609/45637 Z-Wave Wireless Lighting to create a 3-way circuit

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.