GoControl GC-TBZ48 Battery-Powered Z-Wave Thermostat

From Wink@Home Wiki
Jump to: navigation, search
GoControl GC-TBZ48 Battery-Powered Z-Wave Thermostat
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer GoControl
Model/Part # GC-TBZ48
Network Type ZWave
Category(s) HVAC
Type(s) Thermostat

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

GoControl GC-TBZ48 Battery-Powered Z-Wave Thermostat


OVERVIEW


The GoControl battery-powered z-wave thermostat is one of the easiest smart thermostats to install and is controllable by all z-wave hubs, including the 2Gig go!control security system. When integrated with the apps that control your z-wave hub, lets you adjust your home's hvac settings from any smartphone or tablet, whether you are sitting in your living room or in a hotel room across the globe. Using the battery-powered version, low-voltage integrators can connect the thermostat to 95% of hvac systems without the help of an electrician or hvac contractor. Its flexible design also allows for the thermostat to be powered by the hvac systems 24Vac "c" wire, if desired

KEY FEATURES


  • Battery-powered design runs on four ( 4 ) aa batteries
  • Extremely long two year battery life
  • Can be powered by 24 vac "c" wire from hvac system
  • Easy installation and programming
  • Usb firmware upgradeablity

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.