GoControl WNK01-21KIT Z-Wave Essentials Security Kit

From Wink@Home Wiki
Jump to: navigation, search
GoControl WNK01-21KIT Z-Wave Essentials Security Kit
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Officially Supported
Manufacturer GoControl
Model/Part # WNK01-21KIT
Network Type ZWave
Category(s) Access Control, Security & Monitoring
Type(s) Monitoring
Sub-Type(s) Open/Close
Motion
Kit

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

GoControl WNK01-21KIT Z-Wave Essentials Security Kit



KEY FEATURES


  • Adding Go Control sensors to a hub is easy; insert the battery to the sensor; open your app follow on screen instructions to add sensor to network
  • The Go Control essentials kit allows for easy expansion to include more sensors, cameras, door locks etc.
  • The Go Control essentials kit sensors can also be used in lifestyle or aging in place scenarios - occupancy sensing, triggering lighting events etc.
  • GoControl D/W sensors are easy to install; Monitor doors, windows, medicine cabinets and safes; Alerts are sent via in-app push notifications
  • GoControl motion sensor is easy to install and is perfect for detecting movement in hallways or rooms; Alerts sent via in-app push notifications

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.