HomeSeer HS-WS100 Z-Wave Plus Wall Switch

From Wink@Home Wiki
Jump to: navigation, search
HomeSeer HS-WS100 Z-Wave Plus Wall Switch
Compatibility Unofficial - User Verified
Manufacturer HomeSeer
Model/Part # HS-WS100
Network Type ZWave
Category(s) Lights & Power
Type(s) Dimmer
Sub-Type(s) Hardwired

Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

HomeSeer HS-WS100 Z-Wave Plus Wall Switch


HS-WS100+ is a wireless Z-Wave wall switch that supports on-off operation for most lighting and appliance loads. The switch is Z-Wave Plus certified to ensure support for the latest Z-Wave features. HS-WS100+ may be used with most home controllers but should be used with HomeSeer HomeTrollers for best compatibility with all features. Once installed, HS-WS100+ works like any other paddle-style switch and will control on and off functions for the attached load. However, add it to any HomeSeer system and you'll be able to trigger up to 6 different events! • Press top or bottom of paddle once - turns attached load on or off • Press top or bottom of paddle twice (double-tap) - triggers two different HomeSeer events • Press top or bottom of paddle three times (triple-tap) - triggers two more different HomeSeer events • Press & hold top or bottom of paddle - triggers two more different HomeSeer events


  • Supports wireless on-off control of most lighting and appliance loads
  • Supports instant status when controlled locally when used with HomeSeer systems
  • Includes double-tap, triple-tap and press & hold event triggers when used with HomeSeer (or compatible) controllers
  • Z-Wave Plus certified for easy inclusion and reliable communications
  • Easy screw terminal installation


Use with HomeSeer HS-WA100 Wired 3-Way Companion Switch to create a 3-way circuit



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.