Honeywell RTH9580WF Wi-Fi Smart Thermostat

From Wink@Home Wiki
Jump to: navigation, search
Honeywell RTH9580WF Wi-Fi Smart Thermostat
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Officially Supported
Manufacturer Honeywell
Model/Part # RTH9580WF
Network Type WiFi
Category(s) HVAC
Access Control, Security & Monitoring
Type(s) Thermostat
Monitoring
Sub-Type(s) Temperature
Humidity

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Checkmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

Honeywell RTH9580WF Wi-Fi Smart Thermostat



KEY FEATURES


  • Simple set-up that adjusts temperatures to fit your daily life. Onscreen Help" button answers questions as you go
  • Know about extreme indoor temperatures. Stay up-to-date on local weather conditions. Smart Response gives you the right temperature at the right time
  • Choose a color scheme that blends with your home's decor or adds contrast
  • Free highly rated app with no monthly fee
  • Simple set-up with one touch weather and smart alerts
  • Unit measures 4.5" x 3.5"

NOTES

  • Compatible with heating, cooling and heat pumps.
    • Does not work with heat pumps with electric baseboard heat (120-240 volts).
    • In order to power your Honeywell Wi-Fi smart thermostat (RTH9580WF), your system must contain a c-wire. Use the chart below to confirm that your system meets the compatibility requirements. This chart will determine compatibility with most systems, but as wiring systems vary from home to home, there may be some exceptions.
      1. Does your current thermostat have 110V or higher written on it? If yes this system is compatible — continue to next question.
      2. Do you have thick wires that are connected using wire nuts? If yes — your system is not compatible. If no — continue to the next question.
      3. Do you have a wire connected to terminal labeled "C"? If yes — your system is compatible. If no move the next question.
      4. Do you have an extra wire that is not connected to any terminal on the thermostat wall plate? Or — if no — do you have a wire connected to terminal labeled "G"? If yes to either of these questions, this thermostat may be compatible with your system.
    • To help you know for sure if your system will work with the Wi-Fi thermostat, please send us a picture of your current thermostat wiring. Take a picture of your current wall plate with wires connected to the lettered terminals.

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.