Inovelli NZW36 Z-Wave Plug w/Built-in Z-Wave Repeater

From Wink@Home Wiki
Jump to: navigation, search
Inovelli NZW36 Z-Wave Plug w/Built-in Z-Wave Repeater
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Inovelli
Model/Part # NZW36
Network Type ZWave
Category(s) Lights & Power
Type(s) Outlet
Switch
Sub-Type(s) Plugin

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

REPORTED BY
Who Eric Hines
When 6/1/2017
Where LINK

CONFIRMED WORKING: Unofficial - User Verified

Inovelli NZW36 Z-Wave Plug w/Built-in Z-Wave Repeater


OVERVIEW


Inovelli exists to make life simpler through Home Automation. We started from an idea that people want their lives to be simpler. Our products are designed to be easy to install and work with over 1700 of other products and more than 450 different brands.

Tested Compatible HUB's and Appliances

SmartThings, Wink (see disclaimer below), Vera (UI5 & UI7), Staples Connect, HomeSeer, Zipamini (Zipato), Amazon Alexa (Only works thru a compatible HUB - Please do not buy if you do not have an external HUB)

Non-compatible Hubs

Since this plug is Z-Wave Certified, it should, in theory work with any Z-Wave enabled HUB. Please check your HUB to ensure it supports Z-Wave. If, for some reason our plug does not work with your HUB, we will fully refund you.

About this Smart Plug

The product on this page is a Z-Wave PLUS On/Off Smart Plug-In Module + Z-Wave Range Extender (1-Channel) which has one smart plug and one "always-on" pass-thru outlet along with a built in repeater. Z-Wave Plus is the newest technology from Z-Wave, boasting a 67% increase in range, 250% more bandwidth, and more (and is fully compatible with older Z-Wave models)

Closing Words

We know that Home Automation can be tough for the beginner (we've been there), so every smart home electrical outlet we sell comes with a QR code and special link that directs to a step by step tutorial (video and written) on how to set up your new Home Automation plug.

Simplifying lives, one smart home product at a time… that’s Inovelli.

KEY FEATURES


  • DISCLAIMER: To work with Amazon Echo (Alexa) you must have a separate Z-Wave enabled HUB (such as SmartThings)

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.