Intermatic HA02C Home Settings Wireless Heavy-Duty Plug-In Appliance Module

From Wink@Home Wiki
Jump to: navigation, search
Intermatic HA02C Home Settings Wireless Heavy-Duty Plug-In Appliance Module
Compatibility Unofficial - User Verified
Manufacturer Intermatic
Model/Part # HA02C
Network Type ZWave
Category(s) Lights & Power
Type(s) Switch
Sub-Type(s) Plugin

Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Intermatic HA02C Home Settings Wireless Heavy-Duty Plug-In Appliance Module


With the HomeSettings lighting wireless plug-in appliance module, you can experience all the benefits of home automation for a fraction of the cost of most automation systems. You can control almost any appliance that draws up to 15 amps of power, and most lighting fixtures (including those with compact fluorescent bulbs). This unit features an LED that shows feedback from the controller during set-up, and demonstrates that the controlled device is working.

HomeSettings uses advanced Z-Wave technology -- a wireless mesh network that delivers reliable control of countless applications throughout your home. This outstanding system was voted Best Emerging Tech by the editors at CNET magazine in 2006; and it's exactly the sort of home protection measure that's recommended by the Burglary Prevention Council.


  • Controls appliances up to 15 Amps and lighting (including compact fluorescent bulbs)
  • Heavy-duty 3 prong plug and receptacle
  • Manual override ability
  • LED shows feedback from controller during setup and that it is working
  • For indoor use only
  • 15 amps resistive
  • 8.3 amps tungsten
  • 1200 watts inductive
  • 120VAC, 60Hz
  • 1/2 horsepower
  • Temperature operating range: 0 to 60 degrees C
  • Provides wireless control at up to 100 feet



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.