Intermatic HA03C Home Settings Wireless Plug-In Indoor Lamp Module

From Wink@Home Wiki
Jump to: navigation, search
Intermatic HA03C Home Settings Wireless Plug-In Indoor Lamp Module
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Intermatic
Model/Part # HA03C
Network Type ZWave
Category(s) Lights & Power
Type(s) Dimmer
Outlet
Sub-Type(s) Plugin

PRODUCT FEATURES
Dimmable Checkmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Intermatic HA03C Home Settings Wireless Plug-In Indoor Lamp Module


OVERVIEW


With the HomeSettings lighting wireless plug-in lamp module, you can experience all the benefits of home automation for a fraction of the cost of most automation systems. With this module, you can control almost any floor or table lamp up to 300 watts; and this unit features an LED that shows feedback from the controller during set-up, and demonstrates that the controlled device is working.

HomeSettings uses advanced Z-Wave technology -- a wireless mesh network that delivers reliable control of countless applications throughout your home. This outstanding system was voted Best Emerging Tech by the editors at CNET magazine in 2006; and it's exactly the sort of home protection measure that's recommended by the Burglary Prevention Council.

KEY FEATURES


  • Controls ordinary lamps using remote control
  • Wireless control up to 100 feet
  • On/Off and dim settings
  • Manual override function
  • 300 watts
  • 120V AC, 60Hz
  • Temperature operating range: 0 to 60 degrees C

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.