Intermatic HA05C Home Settings Screw In Module

From Wink@Home Wiki
Jump to: navigation, search
Intermatic HA05C Home Settings Screw In Module
Compatibility Unofficial - User Verified
Manufacturer Intermatic
Model/Part # HA05C
Network Type ZWave
Category(s) Lights & Power
Type(s) Switch
Sub-Type(s) Other

Dimmable Xmark.png
Weatherproof Checkmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Intermatic HA05C Home Settings Screw In Module


With the HomeSettings lighting wireless 300 watt outdoor screw-in lamp module, you can experience all the benefits of home automation for a fraction of the cost. It features a manual override, and an LED that shows feedback from the controller during set-up, and demonstrates that the controlled device is working. With this easy-to-use module, you can control incandescent and compact fluorescent bulbs around your home on patios, lawn fixtures, or porches. It's great for coach lights and lamp posts, not to mention flood lights and security lights.

HomeSettings uses advanced Z-Wave technology -- a wireless mesh network that delivers reliable control of countless applications throughout your home. This outstanding system was voted Best Emerging Tech by the editors at CNET magazine in 2006; and it's exactly the sort of home protection measure that's recommended by the Burglary Prevention Council.


  • For incandescent, CFL, and PAR lamps
  • Fits most outdoor fixtures
  • On/off functions
  • Temperature operating range: -35 degrees Celsius to 60 degrees Celsius
  • 300-watts Tungsten, 42-watts compact fluorescent
  • 4-watts compact fluorescent
  • 120-volts AC, 60Hz



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.