Leviton DZMX1-1LZ Decora Z-Wave Dimmer

From Wink@Home Wiki
Jump to: navigation, search
Leviton DZMX1-1LZ Decora Z-Wave Dimmer
Compatibility Officially Supported
Manufacturer Leviton
Model/Part # DZMX1-1LZ
Network Type ZWave
Category(s) Lights & Power
Type(s) Dimmer
Sub-Type(s) Hardwired

Dimmable Checkmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

Leviton DZMX1-1LZ Decora Z-Wave Dimmer


  • Compatible with Wink App and Amazon Echo (requires Wink HUB)
  • 450W Dimmable LED/CFL, 1000W Incandescent, Halogen, MLV and Mark X
  • 49 different fade rates
  • Supports Z-Wave beaming and Network Wide Inclusion



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.