Leviton VRPD3-1LW Vizia RF Series 300-watt Plug-In Lamp Dimming Module

From Wink@Home Wiki
Jump to: navigation, search
Leviton VRPD3-1LW Vizia RF Series 300-watt Plug-In Lamp Dimming Module
Compatibility Unofficial - User Verified
Manufacturer Leviton
Model/Part # VRPD3-1LW
Network Type ZWave
Category(s) Lights & Power
Type(s) Dimmer
Sub-Type(s) Plugin

Dimmable Checkmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Leviton VRPD3-1LW Vizia RF Series 300-watt Plug-In Lamp Dimming Module


Vizia RF + Series 300 Watt Scene Capable Plug-In Lamp Dimming Module with Z-Wave Technology for CFL/LED/Incandescent Turn any standard receptacle into the essence of "smart" lighting with the scene capable plug in lamp dimming module As part of the Z-Wave wireless network, the plug in module is a great addition to any upgrade project and can now be achieved for much less than you might have imagined Z-Wave: A smart-home ecosystem, the Z-Wave technology within the Vizia RF + system enables your connected products to be controlled and monitored from a central location The low-power radio waves travel easily throughout the walls and floors of your home with the Vizia RF + remote and the system even has capabilities to be controlled from your smart phone or computer wherever internet access is available Features: On/Off/Dim/Bright incandescent load scene and zone control switching capabilities Provides 2-way status updates The button on the front of the VRPD3 is now exclusively utilized for including/excluding the device in a Z-Wave network Requires the Vizia RF + Handheld Remote - VRCPG for programming and control of the Vizia RF + System (sold separately) Specifications: Product Weight: 0336 lbs Dimensions (LxWxH): 225 x 2 x 3 Inch Leviton is the smart choice, providing the most comprehensive range of solutions to meet the needs of today's residential, commercial and industrial buildings.


  • Provides ON/OFF/DIM/BRIGHT switching of CFL/LED loads up to 100W
  • Provides ON/OFF/DIM/BRIGHT switching of incandescent loads up to 300W
  • Provides ON/OFF scene and zone compatibility
  • 2-way status updates
  • Optimized for use with home automation hubs, gateways, and controllers



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.