Linear FS20Z-1 Z-Wave Isolated Contact Fixture Module

From Wink@Home Wiki
Jump to: navigation, search
Linear FS20Z-1 Z-Wave Isolated Contact Fixture Module
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Linear
Model/Part # FS20Z-1
Network Type ZWave
Category(s) Lights & Power
Type(s) Switch
Sub-Type(s) Other
Files FS20Z1_manual.pdf

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Linear FS20Z-1 Z-Wave Isolated Contact Fixture Module


OVERVIEW


Imagine being able to turn on your backyard spa with your smart phone, or get the whole-house vent fan running before you get home - so you can enter a nice comfortable home! Well, Linear is giving you that control for your home or business. Linear is helping to give you the latest in high tech yet also making it simple to install and use. The Linear FS20Z-1 Z-Wave Fixture Module can be wired anywhere you have a permanently-installed AC operated device located, giving you Z-Wave control of that item from another location - without the need to hit the switch or breaker! With the FS20Z, you get wireless Z-Wave remote ON/OFF control of connected items using a remote, wall controller, or smart phone or tablet. Liner's FS20Z is wired in place of the switch or inside the junction box where the device gets its power (even if it doesn't have a traditional switch, such as with a pump, outdoor display electronics or an electric hot water heater). All Linear Z-Wave products are compatible with certified Z-Wave controllers, allowing integration with a large number of options in home automation systems. Linear has been around for 53+ years and is the world's largest consumer of Z-Wave chips for smart devices, so you know that we take quality seriously. Z-Wave controllers - I. e. hubs/gateways/remotes are sold separately. Maximum Load: Isolated Contacts: 20 amps G. P. maximum, 277 VAC, 10FLA, 60LRA, 250VAC, Motor: 1 H. P. maximum, 120/240 VAC Incandescent: TV8 (Tungsten), 120 VAC, 960W maximum Signal (Frequency): 908. 42 MHz Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave device Input: 120 VAC, 50/60 Hz Z-Wave Version 4. 55 Network Inclusion Scene: Command Class Security Compatible Isolated Relay Output up to 277v.

KEY FEATURES


  • Uses Z-Wave's Scene Command Class
  • Perfect for Commercial Lighting, Dry-Contact Relays, Pool Pumps, Water Heaters, or In-Ceiling Lighting
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products
  • Mounts inside a standard single-gang junction box

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.