Linear WADWAZ-1 Z-Wave Door/Window Sensor

From Wink@Home Wiki
Jump to: navigation, search
Linear WADWAZ-1 Z-Wave Door/Window Sensor
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Officially Supported
Manufacturer Linear
Model/Part # WADWAZ-1
Network Type ZWave
Category(s) Access Control, Security & Monitoring
Type(s) Monitoring
Sub-Type(s) Open/Close

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

Linear WADWAZ-1 Z-Wave Door/Window Sensor



KEY FEATURES


  • Internal reed switch
  • External switch support
  • 100' line-of-sight range
  • Anti-tamper design
  • Up to 5 Associations

NOTES

Pair this as a GoControl Door/Window Sensor

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.