Linear WD1000Z Z-Wave Wall Dimmer Switch, 1000W

From Wink@Home Wiki
Jump to: navigation, search
Linear WD1000Z Z-Wave Wall Dimmer Switch, 1000W
Compatibility Unofficial - User Verified
Manufacturer Linear
Model/Part # WD1000Z
Network Type ZWave
Category(s) Lights & Power
Type(s) Dimmer
Sub-Type(s) Hardwired
Files WD1000Z-Manual.pdf

Dimmable Checkmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Linear WD1000Z Z-Wave Wall Dimmer Switch, 1000W


GoControl is helping to make your home high tech yet also making it so simple to install and use! the GoControl WD1000Z-1, 1000 watt wall dimmer/switch is wired in place of a traditional lighting wall switch or dimmer. the wd1000z, allows wireless z-wave remote on/off and dimming control of connected items using a remote, wall controller, smart phone or tablet. the outlet sports a blue led status indicator, giving you the comfort of knowing it's working and helping you to locate the outlet in a dark room. the GoControl wd1000z outlet can be included in a programmed lighting 'scene', such that multiple z-wave-connected lights or electrical items can be turned on or off with a single click of your controller or remote device. all GoControl z-wave products are compatible with certified z-wave controllers, allowing integration with a large number of options in home automation systems. linear/go control is the world's largest consumer of z-wave chips for smart devices and we've been successfully building wireless electronics for over 53 years - so you know that we take quality seriously. z-wave controllers - i.e. hubs/gateways/remotes are sold separately. maximum load: 1000 watts (for control of permanently installed lighting fixtures only - not for control of receptacles)


  • 1000W wall mount dimmer switch with z-wave technology
  • GoControl z-wave lighting devices can be voice-controlled using the amazon echo and wink smart hub (both sold separately)
  • Control the smart appliance switch from anywhere by Wi-Fi or with internet-connected smart phone or tablet via the hub/controller app
  • Fits in standard single-gang electrical box and helps you save energy by controlling your power usage anytime, anywhere
  • Compatible with incandescent and most dimmable fluorescent, halogen, xenon and led fixtures
  • signal (frequency): 908. 42 MHz
  • range: up to 100 feet between the wireless controller and/or the closest z-wave device
  • input: 120v 15A 60Hz
  • z-wave version 4. 55



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.