Linear WD500Z-1 Z-Wave Wall Dimmer

From Wink@Home Wiki
Jump to: navigation, search
Linear/2gig WD500Z-1 Z-Wave Wall Dimmer
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Linear/2gig
Model/Part # WD500Z-1
Network Type ZWave
Category(s) Lights & Power
Type(s) Dimmer
Sub-Type(s) Hardwired
Files WD500Z1_manual.pdf

PRODUCT FEATURES
Dimmable Checkmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Linear/2gig WD500Z-1 Z-Wave Wall Dimmer



KEY FEATURES


  • Requires a Neutral
  • Range: Up to 100 feet
  • Uses Z-Wave's Scene Command Class
  • Easily replace existing standard switch to add a Z-Wave controlled lighting dimmer. Compatible with any Z-Wave certified gateway
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products
  • Compatible with incandescent and most dimmable fluorescent, halogen, Xenon and LED fixtures and The wires are pre-cut for easy stripping.

NOTES

  1. Pair this to the Wink Hub by adding a new product and choosing Lights -> Zwave Light.
  2. When prompted by the app, double-tap either the top or bottom of the switch paddle.

I've had experiences where the App doesn't think the switch was added and times out. If you exit the app and go back in, you should see a new light called "Light" that you can then edit and rename as you see fit.

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.