Lutron PD-5NE-WH Caseta Wireless Electronic Low Voltage In-Wall Dimmer

From Wink@Home Wiki
Jump to: navigation, search
Lutron PD-5NE-WH Caseta Wireless Electronic Low Voltage In-Wall Dimmer
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Officially Supported
Manufacturer Lutron
Model/Part # PD-5NE-WH
Network Type Lutron ClearConnect
Category(s) Lights & Power
Type(s) Dimmer
Sub-Type(s) Hardwired

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

Lutron PD-5NE-WH Caseta Wireless Electronic Low Voltage In-Wall Dimmer


OVERVIEW


Bring technology and style to your home with the Lutron Caseta elv+ dimmer. Caseta wireless from Lutron allows you to control your lights from anywhere within your home with the Pico remote control (sold separately) or from anywhere with your mobile device via the free app and Caseta smart bridge (also sold separately). the Caseta elv+ dimmer allows you to recall your favorite light level with the new preset button for added convenience, and is designed to control many loads types: 500-Watt of incandescent, halogen, or electronic low voltage, 400-watt of magnetic low voltage, and 250-Watt of dimmable LED or dimmable CFL (neutral wire connection and 10W minimum load required for all load types). out of the box the dimmer is set to control elv, incandescent, halogen and many compatible leds, however is phase selective the dimmer output can be changed for MLV and certain LED bulbs with simple button press programming. The Caseta elv+ dimmer is a great solution for LED fixtures with integrated, built-in drivers, elv track lights, and problem leds that may prefer an elv dimmer. To use in a multi-location application, replace the existing switch with a Pico remote control and wall plate Adapter (both sold separately). please note, wall plate for dimmer is also sold separately.

KEY FEATURES


  • Works with all load types and provides the best dimming performance for leds (compatible with 500+ bulbs, view "technical specification" below)
  • Works with up to 500-Watts elv/inc/hal, 400-watts MLV, or 250-watts dimmable LED
  • Turn lights on/off, raise/lower to adjust brightness, or tap the favorite button to return lights to pre-selected level
  • Neutral Wire required and 10-Watt minimum load

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.