Lutron PD-6ANS-WH Caseta Wireless Switch

From Wink@Home Wiki
Jump to: navigation, search
Lutron PD-6ANS-WH Caseta Wireless Switch
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Officially Supported
Manufacturer Lutron
Model/Part # PD-6ANS-WH
Network Type Lutron ClearConnect
Category(s) Lights & Power
Type(s) Switch
Sub-Type(s) Hardwired

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

Lutron PD-6ANS-WH Caseta Wireless Switch


OVERVIEW


Experience the ultimate convenience in lighting control with Lutron family of Caseta wireless dimmers, switches, and smart phone control. The Caseta wireless in-wall switch provides switching of multiple load types and, when paired with Pico remote controls, allows remote control from anywhere in the space. Use the Pico remote control either in your hand, on a tabletop pedestal or by mounting the remote directly to the wall (remote control and accessories sold separately). you can even use the Pico remote to control the lights from your car as you arrive home. This switch works with up to 720 watts of incandescent, halogen, Elv and mlv, 6 amps of dimmable LED/CFL and 3.6 amps of general purpose fans. Neutral wire required. Coordinating wall plate sold separately.

KEY FEATURES


  • Works with up to 720 watts of Inc/HAL/elv/MLV, 6 Amps of dimmable LED/CFL and 3.6 Amps of general purpose fans
  • Turns lights on and off (for added convenience, control your lights with a Pico remote control, sold separately)
  • For use in single pole and multi-location applications (use Pico remotes or existing toggle Switches in multi-location applications)

NOTES

Official Support for the Wink Hub 2 only! It might not work with the original Wink Hub.

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.