Lutron PJ2-2B 2-Button Pico Remote

From Wink@Home Wiki
Jump to: navigation, search
Lutron PJ2-2B 2-Button Pico Remote
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Officially Supported
Manufacturer Lutron
Model/Part # PJ2-2B
Network Type Lutron ClearConnect
Category(s) Hubs & Controllers
Type(s) Remote

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

Lutron PJ2-2B 2-Button Pico Remote


OVERVIEW


The Pico remote control is a convenient way to control Lutron Caseta Wireless dimmers. Use this Pico remote control to turn lights on or off from anywhere in the room. Use it as a handheld remote, mount it on a wall, or mount it to a tabletop pedestal.

KEY FEATURES


  • This handy wireless remote controls Caseta in-wall and plug-in lamp dimmers from anywhere within the home
  • Turn on and off multiple lights with the touch of a button
  • Use as handheld remote, mount on a tabletop pedestal (L-PED1-WH) or attach to the wall with a bracket (PICO-WBX-ADAPT)
  • Works as a switch where you need one most - fits within a standard decora wallplate (CW-1-WH) and mounts to any surface without cutting holes or running wire
  • Uses Lutron's proprietary and highly reliable Clear Connect RF Technology that ensures seamless communication between your Caseta products
  • Remote has 10-year battery life (battery included)

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.