Monoprice 15654 Z-Wave Plus Wall Socket Smart Plug with 2 USB Ports

From Wink@Home Wiki
Jump to: navigation, search
Monoprice 15654 Z-Wave Plus Wall Socket Smart Plug with 2 USB Ports
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Monoprice
Model/Part # 15654
Network Type ZWave
Category(s) Lights & Power
Type(s) Switch
Outlet
Sub-Type(s) Plugin

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Monoprice 15654 Z-Wave Plus Wall Socket Smart Plug with 2 USB Ports


OVERVIEW


Monitor and manage energy consumption to reduce costs with the Monoprice Z-Wave Plus® Wall Socket Smart Plug. This product is a Z-Wave® switched AC plug-in adapter. AC power can be remotely switched on or off manually with a button on the plug, remotely using Z-Wave manual control, or automatically with Z-Wave programming or triggered response.

Using Z-Wave commands, you can query the plug-in to report the power consumption, either as direct wattage or the kilowatt hours (kWh). It also includes two USB ports, one capable of 1A of charging power and the other capable of 2.4A of charging power, so you can keep your mobile devices charged without using another AC power socket for a wall charger.

  • Add Z-Wave control to any AC-powered device or appliance
  • Switch AC devices on/off manually, with manual Z-Wave control, or automatically with Z-Wave programming or triggered response
  • Compatible with any and all Z-Wave network products from any manufacturer
  • Includes two USB charging ports, one at 1A and the other at 2.4A


PRODUCT LINKS


DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.