Orbit 27087 Iris Hose Faucet Timer

From Wink@Home Wiki
Jump to: navigation, search
Orbit 27087 Iris Hose Faucet Timer
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Orbit
Model/Part # 27087
Network Type Zigbee
Category(s) HVAC
Type(s) Irrigation
Plumbing

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Checkmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Unofficial - User Verified

Orbit 27087 Iris Hose Faucet Timer



KEY FEATURES


  • Control your timer's watering schedule from your computer or smart phone
  • Large easy-to-read digital display
  • Easy to program
  • Connects to a standard hose faucet
  • Durable, weather-resistant construction
  • Requires 2 AA batteries (not included)

NOTES

EasyGreenUS said...
I purchased the Orbit Iris Hose Faucet Water Timer Model #27087 from Lowes. Its part of Lowes Iris system that requires a $10 per month subscription. I was able to get it to work with my Wink Hub.
I only have basic on/off and scheduling capabilities. Probably using it with the Iris subscription might give more control. But, I don’t need anything more.
When you first put the batteries into the Timer, it goes into Pairing Mode for 10 minutes. Go to the Wink App, Add a Product, Power, Outlink. Follow the steps. It should pair and you’ll be able to turn the water on/off and schedule waterings.
If it doesn’t work first time after 10 minutes, reset the timer by clicking the reset 5 times in quick succession.
One other thing I would do is set the time on the device before pairing. It appears you loose local control once its paired to Wink. Mine is two hours off.


One user has had an issue where pairing the Orbit Faucet timer to his Wink hub has caused interference with the other zigbee devices connected to the hub

PRODUCT LINKS


DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.