Quirky Tripper Door/Window Sensor

From Wink@Home Wiki
Jump to: navigation, search
Quirky Tripper Door/Window Sensor
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Officially Supported
Manufacturer Quirky
Model/Part # Tripper
Network Type Zigbee
Category(s) Access Control, Security & Monitoring
Type(s) Monitoring
Sub-Type(s) Open/Close

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

Quirky Tripper Door/Window Sensor


OVERVIEW


With Tripper, you can keep tabs on every door and window in your house from anywhere. Install it on your bedroom window, pantry door, or medicine cabinet, and it'll send you an alert whenever a connected hatchway opens or shuts. Tripper can be programmed to trigger your other smart devices, too.

KEY FEATURES


  • Battery lasts approximately 1 year (battery included)
  • Sold in a pack of two
  • Requires the Wink HUB or Relay
  • Part of the Quirky + GE collection of connected products

NOTES

One of the first things a tripper does upon pairing is to update its firmware. This causes the original batteries to die rather quickly. I have a link for replacement batteries below.

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.