Schlage FE599NX CAM 619 Lever-Lock with Z-Wave

From Wink@Home Wiki
Jump to: navigation, search
Schlage FE599NX CAM 619 Home Keypad Lever with Z-Wave Technology
Compatibility Officially Supported
Manufacturer Schlage
Model/Part # FE599NX
Network Type ZWave
Category(s) Access Control, Security & Monitoring
Type(s) Access Control
Sub-Type(s) Lock

Dimmable Xmark.png
Weatherproof Checkmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

Schlage FE599NX CAM 619 Home Keypad Lever with Z-Wave Technology


  • Keyed or keypad entry with up to 19 private four-digit codes
  • Vandal-resistant free-spinning deadbolt turn
  • Grade 2 ANSI/BHMA
  • Easy to install--no wiring
  • Wireless home automation via Z-Wave technology
  • Online monitoring and programming via smartphone, tablet, or computer
  • Limited lifetime warranty on finish and mechanics; 1-year warranty on electronics
  • Receive text or email alert when your family uses their codes, so you know who's home
  • Grant access to your home when you can't be there with a scheduled code to let someone
  • Add, delete or change user codes remotely
  • Run the most important systems in your home-thermostats, locks, lights and cameras from anywhere with Z-Wave technology
  • This Z-Wave enabled product allows for wireless communication to other Z-Wave products in your home



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.