Wink Connected Home Hub

From Wink@Home Wiki
Jump to: navigation, search
Wink Connected Home Hub
Compatibility Officially Supported
Manufacturer Wink
Model/Part #
Network Type ZWave
Lutron ClearConnect
Category(s) Hubs & Controllers
Type(s) Hub

Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

CONFIRMED WORKING: Officially Supported

Wink Connected Home Hub


  • Amazon Echo compatible. Zigbee and Z-wave sensor support, improved Z-wave lighting support, additional Wi-Fi network configurations (WEP and non-broadcasting)
  • A simpler way to a smarter home. All your favorite brands in one simple app.
  • Supports products that use Z-wave, Zigbee, Wi-Fi, Bluetooth, & Lutron ClearConnect making it easy to control your smart products from the Wink app.
  • The Wink app is available in the Apple App Store or Google Play. All you need is an email account. There are no long-term contracts or service fees.


Chip info and photos originally obtained by CMonroe The Wink Hub includes the following chips:

  • 433Mhz (Kidde): PIC16F883 Microcontroller w/TI CC1101 RF Transceiver
  • 433Mhz (Lutron): STM32L100R8 (ARM Cortex M3 @ 32Mhz w/64Kb Flash) w/same TI CC1101 RF Transceiver
  • Z-Wave: Sigma Designs SD3502A
  • Zigbee: Ember EM357 (Cortex M3 based SoC w/192Kb Flash and 12Kb RAM)
  • WiFi/BT: Unknown; Chip with markings "5408E3 E423B1"
  • Host CPU: Freescale i.MX28 @ 454Mhz



  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.