Zooz ZSE08 Z-Wave Plus Door Window Contact Sensor

From Wink@Home Wiki
Jump to: navigation, search
Zooz ZSE08 Z-Wave Plus Door Window Contact Sensor
EBay.jpg
Amazon.jpg
PRODUCT INFORMATION
Compatibility Unofficial - User Verified
Manufacturer Zooz
Model/Part # ZSE08
Network Type ZWave
Category(s) Access Control, Security & Monitoring
Type(s) Monitoring
Sub-Type(s) Open/Close

PRODUCT FEATURES
Dimmable Xmark.png
Weatherproof Xmark.png
RGB Xmark.png
Tunable White Xmark.png
It Speaks Xmark.png
Touchscreen Xmark.png
Voice-Controlled Xmark.png

REPORTED BY
Who Craig Trunzo
When 05/10/2017

CONFIRMED WORKING: Unofficial - User Verified

Zooz ZSE08 Z-Wave Plus Door Window Contact Sensor



KEY FEATURES


  • BEFORE YOU BUY: Make sure your Z-Wave controller supports this Z-Wave Plus device. If you have a Z-Wave enabled alarm system, you will most likely not be able to use this product.
  • Wireless notifications and event triggers (when included to a Z-Wave gateway controller, sold separately).
  • Reliable open/close detection for doors, windows, cabinets, and drawers.
  • Discreet compact design ( 2.75" x 0.79" x 0.79" ). Low battery alerts. Battery lasts up to 2 years (300,000 cycles)
  • Z-Wave Plus Certified (ZC10-16085181), U.S./Canada/Mexico 908.42MHz Z-Wave frequency

PRODUCT LINKS

DISCLAIMER

  1. Although I do my best to verify every product that is reported as compatible, things do change.
    • Firmware updates to either hub might render previously-compatible devices inoperable. Usually, problems like this are reported and addressed by Wink.
  2. Inclusion in this Wiki is a very good indicator of compatibility, but is not a guarantee.
    • One thing to be aware of is that "ZWave Plus" devices might not work with the Wink Hub (1st version), though they should work with the Wink Hub 2.
  3. I use a Wink Hub 2 as my primary controller.
    • My testing is done on the Wink Hub 2.
    • I try to find out if devices reported by others are Hub 1 or Hub 2, but I'm not always able to find out.
  4. I am a beta tester.
    • This means my hub might work with a device that won't work for the general public.
    • I try to avoid adding article for devices that are only compatible with the Wink beta firmware, but sometimes, something slips through.
    • If I report that it works, but it does not work for you, chances are it will start working for you in the near future.